Outback Power Systems MATE2 - Manual (Page 107)

0
MAIN----------------
6:54:42PM
SUM STATUS SETUP ADV
STATUS--------------
choose device:
FX CC DC MAIN
STATUS/FX/PAGE1-----
choose category:
MODES METER BATT PG2
STATUS/FX/PAGE2-----
choose category:
PG1 ERROR WARN PG3
STATUS/FX/WARN---P00
acin freq
NO
too high
DOWN STATUS PORT
STATUS/FX/WARN---P00
acin freq
NO
too low
DOWN UP TOP PORT
WARNINGS
STATUS/FX/WARN---P00
acin voltage
NO
too high
DOWN UP TOP PORT
STATUS/FX/WARN---P00
acin voltage
NO
too low
DOWN UP TOP PORT
STATUS/FX/WARN---P00
temperature NO
sensor fault
DOWN UP TOP PORT
STATUS/FX/WARN---P00
internal comm NO
error detected
DOWN UP TOP PORT
STATUS/FX/WARN---P00
internal fan
NO
failure detected
DOWN UP PORT
STATUS/FX/WARN---P00
airtemp
204
DOWN UP PORT
STATUS/FX/WARN---P00
fettemp
204
DOWN UP PORT
STATUS/FX/WARN---P00
captemp
204
DOWN UP PORT
STATUS/FX/WARN---P00
ac input
NO
current exceeds max
DOWN UP TOP PORT
STATUS/FX/WARN------
end of warnings
menu
UP TOP STATUS
DISCONNECT REASONS
STATUS--------------
choose device:
FX CC DC MAIN
STATUS/FX/PAGE1-----
choose category:
MODES METER BATT PG2
STATUS/FX/PAGE2-----
choose category:
PG1 ERROR WARN PG3
STATUS/FX/PAGE3-----
choose category:
PG2 DISCON SELL MAIN
STATUS/FX/DISCON-P00
acin freq NO
too high
DOWN STATUS PORT
STATUS/FX/DISCON-P00
acin freq NO
too low
DOWN STATUS PORT
MAIN----------------
6:54:42PM
SUM STATUS SETUP ADV
STATUS/FX/DISCON-P00
acin voltage NO
> max
DOWN UP TOP PORT
STATUS/FX/DISCON-P00
acin voltage NO
< min
DOWN UP TOP PORT
SELL
MAIN----------------
6:54:42PM
SUM STATUS SETUP ADV
STATUS--------------
choose device:
FX CC DC MAIN
STATUS/FX/PAGE1-----
choose category:
MODES METER BATT PG2
STATUS/FX/PAGE2-----
choose category:
PG1 ERROR WARN PG3
STATUS/FX/PAGE3-----
choose category:
PG2 DISCON SELL MAIN
STATUS/FX/DISCON----
end of DISCON menu
UP TOP STATUS
STATUS/FX/SELL---P00
stop sell 255
reason
STATUS PORT