Outback Power Systems MATE2 User Manual
Page 29
Press the <PC> soft key to enable or disable the
MATE’s RS232 communications port.
In the PC communications screen, choose ON or
OFF by pressing the respective soft key. Press the
<BACK> soft key to return to the choose category
screen.
Press the <REPOLL> soft key after a device is
added to, moved, or removed from the HUB.
The MATE has found the HUB and will automati-
cally go to the Port Assignment screen.
After displaying the devices connected to each
Port, the MATE returns to the choose category
screen on its own.
SETUP/MATE/PAGE2--------------
PC communications: OFF
BACK
OFF ON
SETUP/MATE/PAGE2--------------
choose category:
BACK
REPOLL PC DEBUG
SETUP/MATE/PAGE2--------------
choose category:
BACK
REPOLL PC DEBUG
Searching for Devices
HUB Found
Port Assignment
1> FX 2> FX 3> CC
4> CC
5> 6> 7> 8>
9> 10> 2M>
NOTE: Disconnecting the MATE’s CAT5 cable and then reconnecting it also performs the
re-poll task, but the cable can be inconvenient to remove from a mounted MATE.