Outback Power Systems MATE2 - Manual (Page 94)


<INC>and <DEC> set the hour to the desired
time. Press <DOWN> to access the adj min
screen.
<INC> and <DEC> set the minutes to the desired
time. Press the <DONE> soft key to return to the
weekday griduse start screen.
Press the <DOWN> soft key to access the ADV/
MATE/GRIDUSE weekday grid-use stop screen.
The WEEKDAY GRID-USE STOP setting is the
time during the week (Monday-Friday) that a
DROP will be issued to the FX system, forcing a
disconnect from the AC input source. The time
displayed is the default setting. To change the
time, press the <CHANGE> soft key and adjust
the hour and minute settings on the next screens
using the <INC> and <DEC> soft keys. Proceed
through the Adjust Hour (adj hour) and Adjust
Minutes (adj min) screens in the same manner
described in the weekday grid-use start section.
WEEKDAY GRIDUSE START
adj hour 12:00A
DOWN INC DEC
WEEKDAY GRIDUSE START
adj min 12:00A
INC DEC DONE
ADV/MATE/GRIDUSE-----------------
weekday 12:00A
griduse start time
DOWN UP CHANGE
ADV/MATE/GRIDUSE----------------
weekday 12:00A
griduse stop time
DOWN UP CHANGE
Weekday Grid-Use Stop