Outback Power Systems MATE2 - Manual (Page 2)


Dear OutBack Customer,
Thank you for your purchase of OutBack products. We make every effort to assure our power conversion
products will give you long and reliable service for your renewable energy system.
As with any manufactured device, repairs might be needed due to damage, inappropriate use, or unintentional
defect. Please note the following guidelines regarding warranty service of OutBack products:
• Any and all warranty repairs must conform to the terms of the warranty.
• All OutBack equipment must be installed according to their accompanying instructions and manuals with
specified over-current protection in order to maintain their warranties.
• The customer must return the component(s) to OutBack, securely packaged, properly addressed, and ship-
ping paid. We recommend insuring your package when shipping. Packages that are not securely packaged can
sustain additional damage not covered by the warranty or can void warranty repairs.
• There is no allowance or reimbursement for an installer’s or user’s labor or travel time required to disconnect,
service, or reinstall the damaged component(s).
• OutBack will ship the repaired or replacement component(s) prepaid to addresses in the continental United
States, where applicable. Shipments outside the U.S. will be sent freight collect.
• In the event of a product malfunction, OutBack cannot bear any responsibility for consequential losses, ex-
penses, or damage to other components.
• Please read the full warranty at the end of this manual for more information.
About OutBack Power Systems
OutBack Power Systems is a leader in advanced energy conversion technology. Our products include true sine
wave inverter/chargers, maximum power point charge controllers, system communication components, as well
as breaker panels, breakers, accessories, and assembled systems.
Notice of Copyright
MATE System Controller and Display Installation and User Manual REV A © 2007 All rights reserved.
Warranty