Levers. see figure 3-31, D. see figure 3-31, See figure 3-31 – Dell PowerEdge R810 User Manual
Page 157
Advertising
Installing System Components
157
CAUTION:
Do not lift the system board assembly by grasping a memory module,
processor, or other components.
20
Hold the processor board by the handle and a heat-sink release lever (see
Figure 3-23). Angle the processor board out toward the back of the system
and lift the board out of the chassis.
21
Pull the release pin and slide the I/O board forward and out of the chassis.
Figure 3-31.
Removing and Installing the System Board
1
heat-sink release lever
2
power distribution board
3
release pin
4
I/O board
5
tab 6
high-speed
connector
7
guide pins (2)
8
release levers (2)
9
processor board
10
handle
9
4
6
5
7
8
3
2
10
1
8
book.book Page 157 Thursday, February 18, 2010 2:06 PM
Advertising