Information, see step 2 and step, Information, see step 2, Chassis wall. see step 2 and – Dell PowerEdge R810 User Manual
Page 99: From the chassis. see figure 3-10
Advertising
Installing System Components
99
Figure 3-10.
Front-Chassis Assembly
To slide the front-chassis assembly back into the chassis:
1
Slide the assembly inside until the assembly snaps into position.
NOTE:
For proper system cooling, make sure that the cables inside the system do
not obstruct airflow.
2
Route the SAS and SATA cables along the chassis wall and the RAID
battery carrier. See Figure 3-10.
1
front-chassis assembly
2
control panel cable
3
USB cable
4
SAS backplane power cable
5
cable clamp
6
RAID battery carrier
7
release tabs (2)
8
SATA cable
9
SAS cables (2)
7
1
2
3
4
8
5
6
9
book.book Page 99 Thursday, February 18, 2010 2:06 PM
Advertising