Dell PowerEdge R810 - Manual (Page 30)

30 About Your System
E1710 I/O channel
check error.
Review &
clear SEL.
The system BIOS reported
an I/O channel check. Check the SEL for more
information and then
clear the SEL. Remove
AC power to the system
for 10 seconds and restart
the system.
If the problem persists,
see "Getting Help" on
page 195.
E1711 PCI parity
error on Bus
## Device ##
Function ##
The system BIOS reported a
PCI parity error on a
component that resides in
PCI configuration space at
bus ##, device ##,
function ##. Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 177.
PCI parity
error on Slot
#. Review &
clear SEL.
The system BIOS reported a
PCI parity error on a
component that resides in
the specified slot. Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 177.
E1712 PCI system
error on Bus
## Device ##
Function ##
The system BIOS reported a
PCI system error on a
component that resides in
PCI configuration space at
bus ##, device ##,
function ##. Remove and reseat the
PCIe expansion cards. If
the problem persists, see
"Troubleshooting
Expansion Cards" on
page 177.
PCI system
error on Slot
#. Review &
clear SEL.
The system BIOS reported a
PCI system error on a
component that resides in
the specified slot. Reinstall the expansion-
card riser. See "Expansion
Cards and Expansion-
Card Risers" on page 114.
If the problem persists,
the riser card or system
board is faulty. See
"Getting Help" on
page 195.
Code Text Causes Corrective Actions
book.book Page 30 Thursday, February 18, 2010 2:06 PM