Front bezel (optional), Removing the front bezel, Installing the front bezel – Dell PowerEdge R810 User Manual
Page 83
Advertising
Installing System Components
83
Front Bezel (Optional)
Removing the Front Bezel
1
Unlock the keylock at the left end of the bezel.
2
Lift up the release latch next to the keylock.
3
Rotate the left end of the bezel away from the front panel.
4
Unhook the right end of the bezel and pull the bezel away from
the system. See Figure 3-2.
Figure 3-2.
Removing and Installing the Front Bezel
Installing the Front Bezel
1
Hook the right end of the bezel onto the chassis.
2
Fit the free end of the bezel onto the system.
3
Secure the bezel with the keylock. See Figure 3-2.
1
release latch
2
key lock
3
front bezel
1
2
3
book.book Page 83 Thursday, February 18, 2010 2:06 PM
Advertising