Dell PowerEdge R810 - Manual (Page 27)

About Your System 27
E141C Unsupported
CPU configur-
ation. Check
CPU or BIOS
revision.
Processors are in an
unsupported configuration. Check if the processors
are installed as per the
supported configuration.
For more information on
supported processor
configurations, see
Table 3-5.
Ensure that your
processors match and
conform to the type
described in the processor
technical specifications
outlined in your system’s
Getting Started Guide.
E141F CPU #
protocol
error. Power
cycle AC.
The system BIOS reported a
processor protocol error. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 195.
E1420 CPU Bus
parity error.
Power cycle
AC.
The system BIOS reported a
processor bus parity error. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 195.
E1421 CPU #
initializati
on error.
Power cycle
AC
The system BIOS reported a
processor initialization error. Remove AC power to the
system for 10 seconds and
restart the system.
If the problem persists,
see "Getting Help" on
page 195.
Code Text Causes Corrective Actions
book.book Page 27 Thursday, February 18, 2010 2:06 PM