Removing a hard drive from a hard-drive carrier – Dell PowerEdge R810 User Manual
Page 90
Advertising
90
Installing System Components
Removing a Hard Drive From a Hard-Drive Carrier
Remove the screws from the slide rails on the hard-drive carrier and separate
the hard drive from the carrier. See Figure 3-6.
Figure 3-6.
Removing or Installing a Hot-Swap Hard Drive Into a Hard-Drive Carrier
1
hard drive
2
hard-drive carrier
3
SAS/SATA screw hole
4
screws (4)
4
3
2
1
book.book Page 90 Thursday, February 18, 2010 2:06 PM
Advertising