Dell POWEREDGE M1000E - Manual (Page 1020)

C-10
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform ip igmp snooping
show platform ip igmp snooping
Use the show platform ip igmp snooping privileged EXEC command to display platform-dependent
Internet Group Management Protocol (IGMP) snooping information.
show platform ip igmp snooping {all | control [di] | counters | flood [vlan vlan-id] | group
ip-address | hardware | retry [count | local [count] | remote [count]]} [ | {begin | exclude |
include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
all Display all IGMP snooping platform IP multicast information.
control [di] Display IGMP snooping control entries. The keyword has this meaning:
• di—(Optional) Display IGMP snooping control destination index
entries.
counters Display IGMP snooping counters.
flood [vlan vlan-id] Display IGMP snooping flood information. The keyword has this meaning:
• vlan vlan-id—(Optional) Display flood information for the specified
VLAN. The range is 1 to 4094.
group ip-address Display the IGMP snooping multicast group information, where ip-address is
the IP address of the group.
hardware Display IGMP snooping information loaded into hardware.
retry [count | local
[count] Display IGMP snooping retry information. The keywords have these
meanings:
• count—(Optional) Display only the retry count.
• local—(Optional) Display local retry entries.
remote [count] Display remote entries. The keyword has this meaning:
• count—(Optional) Display only the remote count.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.