Debug platform remote-commands – Dell POWEREDGE M1000E User Manual

Page 975

Advertising
background image

B-59

Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference

OL-13271-03

Appendix B Cisco Catalyst Blade Switch 3130 and 3032 for Dell Debug Commands

debug platform remote-commands

debug platform remote-commands

Use the debug platform remote-commands privileged EXEC command to enable debugging of remote
commands. Use the no form of this command to disable debugging.

debug platform remote-commands

no debug platform remote-commands

Syntax Description

This command has no arguments or keywords.

Defaults

Debugging is disabled.

Command Modes

Privileged EXEC

Command History

Usage Guidelines

The undebug platform remote-commands command is the same as the no debug platform
remote-commands
command.

On a stacking-capable switch, when you enable debugging, it is enabled only on the stack master. To
enable debugging on a stack member, you can start a session from the stack master by using the session
switch-number privileged EXEC command. Then enter the debug command at the command-line
prompt of the stack member. You also can use the remote command stack-member-number LINE
privileged EXEC command on the stack master switch to enable debugging on a member switch without
first starting a session.

Related Commands

Release

Modification

12.2(40)EX1

This command was introduced.

Command

Description

show debugging

Displays information about the types of debugging that are enabled.

Advertising