Dell POWEREDGE M1000E - Manual (Page 83)

2-53
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Chapter 2 Cisco Catalyst Blade Switch 3130 and 3032 for Dell Cisco IOS Commands
boot config-file
boot config-file
Use the boot config-file global configuration command on a standalone switch to specify the filename
that Cisco IOS uses to read and write a nonvolatile copy of the system configuration. Use the no form
of this command to return to the default setting.
boot config-file flash:/file-url
no boot config-file
Syntax Description
Defaults The default configuration file is flash:config.text.
Command Modes Global configuration
Command History
Usage Guidelines This command works properly only from a standalone switch in a stack.
Filenames and directory names are case sensitive.
This command changes the setting of the CONFIG_FILE environment variable. For more information,
see
Appendix A, “Cisco Catalyst Blade Switch 3130 and 3032 for Dell Boot Loader Commands.”
Related Commands
flash:/file-url The path (directory) and name of the configuration file.
Release Modification
12.2(40)EX1 This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.