Dell POWEREDGE M1000E - Manual (Page 1028)

C-18
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform ipc trace
show platform ipc trace
Use the show platform ipc trace privileged EXEC command to display platform-dependent
Interprocess Communication (IPC) Protocol trace log information.
show platform ipc trace [ | {begin | exclude | include} expression]
Note This command is supported only on stacking-capable switches.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.