Dell POWEREDGE M1000E - Manual (Page 826)

2-796
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-03
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
switchport private-vlan
switchport private-vlan
Use the switchport private-vlan interface configuration command on the switch stack or on a standalone
switch to define a private-VLAN association for an isolated or community port or a mapping for a
promiscuous port. Use the no form of this command to remove the private-VLAN association or
mapping from the port.
switchport private-vlan {association {host primary-vlan-id secondary-vlan-id | mapping
primary-vlan-id {add | remove} secondary-vlan-list} | host-association primary-vlan-id
secondary-vlan-id | mapping primary-vlan-id {add | remove} secondary-vlan-list}
no switchport private-vlan {association {host | mapping} | host-association | mapping
This command is supported only if the switch or stack master is running the IP services feature set. In a
switch stack, we strongly recommend that the stack members also run the IP services feature set when
private VLANs are configured.
Syntax Description
Defaults The default is to have no private-VLAN association or mapping configured.
Command Modes Interface configuration
Command History
Usage Guidelines Private-VLAN association or mapping has no effect on the port unless the port has been configured as
a private-VLAN host or promiscuous port by using the switchport mode private-vlan {host |
promiscuous} interface configuration command.
If the port is in private-VLAN host or promiscuous mode but the VLANs do not exist, the command is
allowed, but the port is made inactive.
association Define a private-VLAN association for a port.
host Define a private-VLAN association for a community or isolated host port.
primary-vlan-id The VLAN ID of the private-VLAN primary VLAN. The range is from 2 to
1001 and 1006 to 4094.
secondary-vlan-id The VLAN ID of the private-VLAN secondary (isolated or community) VLAN.
The range is from 2 to 1001 and 1006 to 4094.
mapping Define private-VLAN mapping for a promiscuous port.
add Associate secondary VLANs to the primary VLAN.
remove Clear the association between secondary VLANs and the primary VLAN.
secondary-vlan-list One or more secondary (isolated or community) VLANs to be mapped to the
primary VLAN.
host-association Define a private-VLAN association for a community or isolated host port.
Release Modification
12.2(40)EX1 This command was introduced.