Dell POWEREDGE M1000E - Manual (Page 1027)

C-17
Cisco Catalyst Blade Switch 3130 and 3032 for Dell Command Reference
OL-13271-03
Appendix C Cisco Catalyst Blade Switch 3130 and 3032 for Dell Show Platform Commands
show platform ip wccp
show platform ip wccp
Use the show platform ip wccp privileged EXEC command to display platform-dependent Web Cache
Communication Protocol (WCCP) information.
show platform ip wccp {detail | label} [ | {begin | exclude | include} expression]
This command is supported only if your switch is running the IP services feature set.
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support
representative while troubleshooting a problem. Do not use this command unless a technical support
representative asks you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
detail Display the platform WCCP details.
label Display the platform WCCP labels.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX1 This command was introduced.