Dell PowerEdge T710 - Manual (Page 154)

154
Installing System Components
Figure 3-30. Removing and Installing the System Board
Installing the System Board
WARNING:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Unpack the new system board and remove the label placard that is inserted
in the memory module socket.
2 Remove the labels from the placard, and affix them on the front of the
chassis.
1 integrated storage controller card
carrier release tab 2 system board
3 release pin
1
3
2
book.book Page 154 Monday, June 15, 2009 11:33 AM