Dell PowerEdge T710 - Manual (Page 164)

164
Troubleshooting Your System
Troubleshooting a Damaged System
WARNING:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
1 Open the system. See "Opening the System" on page 85.
2 Remove the cooling shroud. See "Removing the Cooling Shroud" on
page 87.
3 Ensure that the following components are properly installed. See
"Installing System Components" on page 79.
• Expansion cards
• Power supplies
• Fans
• Processors and heat sinks
• Memory modules
• Hard-drive carriers
4 Ensure that all cables are properly connected.
5 Replace the cooling shroud. See "Installing the Cooling Shroud" on
page 88.
6 Close the system. See "Closing the System" on page 86.
7 Place the system upright and on its feet on a flat and stable surface,
reconnect the system to the electrical outlet, and turn on the system and
attached peripherals.
8 Run the system board tests in the system diagnostics. See "Running the
Embedded System Diagnostics" on page 182.
If the tests fail, see "Getting Help" on page 193.
book.book Page 164 Monday, June 15, 2009 11:33 AM