Dell PowerEdge T710 - Manual (Page 87)

Installing System Components
87
8 Reattach any peripherals and connect the system to an electrical outlet.
9 Turn on the system and attached peripherals.
Cooling Shroud
The cooling shroud directs airflow over the system processor and memory
modules.
WARNING:
Only trained service technicians are authorized to remove the system
cover and access any of the components inside the system. Before you begin this
procedure, review the safety instructions that came with the system.
WARNING:
The memory modules and heat sink can get very hot during normal
operation. Ensure that the memory modules and heat sink have had sufficient time
to cool before you touch it.
CAUTION:
Never operate your system with the cooling shroud removed.
Overheating of the system can develop quickly, resulting in shutdown of the
system and loss of data.
Removing the Cooling Shroud
1 Turn off the system and attached peripherals. Disconnect the system from
the electrical outlet and periperals.
2 Rotate the system feet inward and lay the system on a flat surface. See
Figure 3-4.
3 Open the system. See "Opening the System" on page 85.
4 Push the blue tab towards the direction of the arrow and lift out the
cooling shroud. See Figure 3-5.
book.book Page 87 Monday, June 15, 2009 11:33 AM