Sony GV-D900 User Manual
Page 71
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
1 Trouble check
Operation
Symptom
Cause and/or corrective actions
No sound or only a low sound is heard
when playing back a tape.
•
The stereo tape is played back with HiFi SOUND set to 2
in the menu system.
■ »
Set it to STEREO, (p. 12)
•
The volume is turned to the minimum.
■ *
Open the LCD panel and press VOLUME +. (p. 9)
•
AUDIO MIX is set to ST2 side in the menu system.
Adjust AUDIO MIX in the menu systena (p. 17).
The new sound added to the recorded
tape is not heard.
•
AUDIO MIX is set to STl side in the menu system.
Adjust AUDIO MIX in the menu system (p. 17).
The title is not displayed.
•
TITLE DSPL is set to OFF in the menu system.
■ >
Set it to ON in the menu system, (p. 17)
The title is not recorded.
•
The tape has no cassette memory.
■ >
Use a tape with cassette memory, (p. 38)
•
The cassette memory is full.
Erase another title, (p. 41)
•
The tape is set to prevent accidental erasure.
Slide the protect tab so that red portion is not visible,
(p. 8)
•
Nothing is recorded in that position on the tape.
■ >
Superimpose the title to the recorded position, (p. 40)
The cassette label is not recorded.
•
The tape has no cassette memory.
->
Use a tape with cassette memory, (p. 44)
•
The cassette memory is full.
Erase some titles, (p. 41)
•
The tape is set to prevent accidental erasure.
Slide the protect tab so that red portion is not visible.
Jp.8)
Xsplaying the recorded date, date search
unction does not work.
•
The tape has no cassette memory.
4
Use a tape with cassette memory, (p. 21)
•
CM SEARCH is set to OFF in the menu system.
Set it to'ON. (p. 21)
Tie title search function does not work.
•
The tape has no cassette memory.
Use a tape with cassette memory, (p. 23)
•
CM SEARCH is set to OFF in the menu system.
■ >
Set it to ON. (p. 23)
•
There is no title in the tape.
Superimpose the titles, (p. 38)
!/</
indicator does not appear when using
tape with cassette memory.
•
The gold-plated connector of the tape is dirty or dusty.
Clean the gold-plated connector, (p. 59)
>
Q.
Q.
r+
o’
3
o
3
■D
Continued to the next page
71