Craftsman 917.28927 - Manual (Page 23)

3. ATTACH M O W ER SIDE SUSPENSIO N
ARM S (A) TO CHASSIS - Position hole
in arm over pin (B) on outside of tractor
7. Insert end of link (E) into hole in front
m ow er bracket (H) and secure with
w asher and retainer spring (J).
5. ATTACH REAR LIFT LINKS (C) - Lift
rear corner of m ow er and position slot
in link assem bly over pin (D) on rear
m ow er bracket and secure w ith washer
and retainer spring.
hole in idler arm (R).
9. Push clutch cable housing guide (P) into
bracket, slide collar (L) onto guide and
secure w ith retainer spring (K).
10. Install belt onto engine pulley (M) and belt
keepers (G ).
. .... ...
6. ATTACH FRO NT LINK (E) - W ork from
left side of tractor. Insert rod end of link
assem bly through front hole in tractor
front suspension bracket (F).
IMPORTANT: Check belt for proper routing
in all m ower pulley grooves.
11. Raise attachm ent lift lever to highest
position.
12. If necessary, adjust gauge w heels before
operating m ow er as show n in the Opera­
tion section of this m anual.