C.fn-12, C.fn-13 – Canon EOS 1 V HS User Manual
Page 108
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Custom Function Settings
C.Fn-12
¡Viirror lockup
C.Fn
Function
No.
Description
C.Fn-12 Mirror lockup
0
Disabled
1
Enabled
C.Fn-12-1 :
Effective for close-up and telephoto shots to prevent
camera vibration caused by the mirror’s reflex action.
See
page 81 to use this feature.
C.Fn-13
Focusing point selection limit and spot metering linkage
The selectable focusing points can be limited to 11 or 9 to make
focusing point selection faster. Spot metering can also be linked to
the focusing point. This makes it easier to frame the subject, and it is
effective for spotlighted subjects.
C.Fn
Function
No.
Description
0
•
45 / Center focusing point
1
• • •
• • •
11 / Active focusing point
2
□□a
□□n
11 / Center focusing point
3
• • •
• • •
• • •
9 / Active focusing point
C.Fn-13
Focusing point
selection limit /
Spot metering
linkage (FE lock)
C.Fn-13-1; The selectable focusing points are limited to 11. Spot metering
is linked to the active focusing point, (^p.38)
C.Fn-13-2; The selectable focusing points are limited to 11. Spot metering
is linked to the center focusing point, (-^p.38)
C.Fn-13-3; The selectable focusing points are limited to 9. Spot metering is
linked to the active focusing point, (-^p.38)
o • The metering mode must be set to spot metering before it can be linked to the
focusing point.
• If C.Fn-13-1/2 is set or cancelled, the registered focusing point (-^p.42) will be
replaced by the center focusing point.
106