Canon EOS 1 V HS - Manual (Page 98)

Selecting and Setting a Custom Functions
Custom
Function No.
Custom Function
setting
-Altered Custom
Function indicator on
exposure
compensation scale
Open the side door and press the
<c.Fn> button.
► The Custom Function No. appears on
the LCD panel.
Turn the dial until the
desired Custom Function No.
appears.
Press the <c.Fn> button to change
the Custom Function’s setting.
► The Custom Function setting
changes each time you press the
<C.Fn> button.
• To change C.Fn-O’s setting, press the
<CFn> button for at least 2 seconds.
(^P-127)
Press the shutter button halfway.
► The LCD panel returns to the normal
display and the new Custom Function
setting takes effect.
-3- -2. .-1. .CP. .+1. +2. .+3
f , T T T
(C.Fn-1) (C.Fn-5) (C.Fn-10)(C.Fn-14)
In this example, the scale shows
that Custom Functions C.Fn-1,
C.Fn-5, C.Fn-10, and C.Fn-14 have
been altered.
• Altered Custom Function Indicator
After you alter a Custom Function
setting and press the <C.Fn> button, a
bar ■ appears on the exposure
compensation scale.
The scale’s increments from left to right
are used to denote the 19 Custom
Functions. The left-most increment (-3)
is for C.Fn-1. The next increment to the
right denotes the next Custom Function
in numerical order up to C.Fn-19.
“C.Fn” is the abbreviation for “Custom Function.”
96