Switching to the registered focusing point – Canon EOS 1 V HS User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Focusing Point Registration and Switching
A focusing point can be registered even when C.Fn-13-1/2 has been set to limit
the selectable focusing points to 11. (->p. 106)
When C.Fn-13-3 has been used to limit the selectable focusing points to 9, a
focusing point cannot be registered, (-^p. 106)
“SEL” stands for Select, and “HP” stands for “Home Position.”
Switching to the Registered Focusing Point
Normally, you press the
<S>
button and <ED> button simultaneously to
switch to the registered focusing point. Flowever, with C.Fn-18-1/2
(->p.109), you can just press the <[x]> button to switch to the registered
focusing point. See “Setting Custom Functions” on page 96.
(1) Press only the <I53> button to
switch to the registered focusing
point. ftilSBRBI (^109)
(2) Switch to the registered focusing
point only while pressing the
H109)
< x>.
G.Fn-18-2
• When the <E3> is released, it will
return to the original focusing point.
(3) Press the <S> button and <[1D>
button simultaneously.
• This is the default method with C.Fn-
18-0.
il If no focusing point has been registered, the above steps will switch it to the
center focusing point.
If C.Fn-18-1/2 and C.Fn-4-1/3 have been set, you can press only the <153> to
switch to the registered focusing point and start autofocusing at the same time.
43