Canon EOS 1 V HS User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Basic Operation
There are three ways to use the <Q>:
1. While holding down a button, turn the <0> dial.
2. After pressing and releasing a button, turn the <©> dial.
3. Just turn the <0> dial.
Look at the LCD panel to confirm the setting.
To restore the button's function or to ready the camera for picture taking,
turn the
dial.
The <0> is used to set the following:
1. Real-time exposure compensation
2. Aperture
3. Flash exposure compensation
4. Focusing point selection
The <©> dial functions only when the <^> switch is set to <ON>.
<OFF> : Set to this position to disable the
<o>.
<ON>
Set to this position to enable the
< o > .
Reverting to the Default Settings
With the EOS-1 V, you can set the shooting mode, metering mode, and
other settings as you wish. You can also use Custom Functions (->p.95) to
customize camera controls and functions according to your preferences.
These preferences can be reset to the default settings with the following
procedure.
17