Film transport, Film id imprinting (w/standard camera back), Shooting data – Canon EOS 1 V HS User Manual
Page 138
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Major Specifications
AF focusing point indicator.......Superimposed focusing point in viewfinder and also indicated on
LCD panel
AF-assist beam.............Emitted automatically by the attached EOS Speedlite when
necessary.
• Shutter
Type............................Vertical-travel, focal-plane shutter with all speeds electronically-
controlled.
Shutter speeds.............30 to 1/8000 sec. in 1/3-stops, X-sync at 1/250 sec.
Shutter release............Soft-touch electromagnetic release
Self-timer....................10-sec. or 2-sec. delay.
• Film Transport
Film loading................. Automatic. After film is loaded and the back closed, the film
advances to frame 1 automatically, taking about 1 sec.
Film advance system... Automatic film advance with built-in motor.
(1) EOS-1 V: Single-frame and continuous shooting.
(2) EOS-1 V HS (w/Power Drive Booster PB-E2); Single-frame,
low-speed continuous, high-speed continuous, and ultra-high
speed continuous (w/NP-E2).
Infrared film................Compatible
Film rewind system......At the end of the roll, automatic film rewind with a built-in motor.
Midroll rewind possible.
Film rewind time/noise.Fligh-speed rewind; Approx. 4.5 sec. for 24-ex. film and approx. 8
sec. for 36-ex. film at 59 dB
Silent rewind................Approx. 12 sec. for 24-ex. film and approx. 18 sec. for 36-ex. film
at 49 dB
• Film ID Imprinting (w/standard camera back)
Information Imprinted Any number from 00 to 99 and film No. from 001 to 999
Imprinting position and size Frame 0 on film leader, text height approx. 1 mm
Imprinting method....... After film advances during initial loading, a minilamp imprints a
transparent LCD numerals on the film base. (Imprinting cannot be
disabled.)
Imprinting confirmation....During imprinting, the ID mark lights on the LCD panel.
Ambient temperature....Imprinting assured between 45°C and -10°C
Power source............... Same as for the camera
• Shooting Data
System........................ When a picture is taken, the shooting data is automatically
recorded in the built-in memory. The data can be later transferred
136