Autofocus – Canon EOS 1 V HS User Manual
Page 137
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Major Specifications
program flash AE, (8) Manual, @ Bulb (Safety shift possible for 2
and 3.)
Metering range............ EV 0-20 for all metering modes (at 20°C with 50mm f/1.4 lens,
ISO 100)
ISO film speed range....ISO 6-6400 (Set automatically with DX-coded film at ISO 25-
5000.)
Exposure compensation.(1) Autoexposure bracketing (AEB): ±3 stops in 1/3-stop
increments.
(2) Manual exposure compensation up to ±3 stops in 1/3-stop
increments set with the Ouick Control Dial
AEB and manual exposure compensation can be set together.
AE Lock....................... (1) Auto AE lock: Operates in One-Shot AF mode with evaluative
metering when focus is achieved.
(2) Manual AE lock: AE lock button activates AE lock in all
metering modes.
Multiple exposures....... Max. 9 multiple exposures per frame (Cancelable and resettable
at any time.). Cancels automatically after all multiple exposures
are taken.
• Autofocus
Type............................TTL-AREA-SIR with a CMOS sensor
Focusing points............Area AF with 45 focusing points
AF working range.........EV 0-18 (at ISO 100)
Focusing modes........... (1) One-Shot AF: Autofocus stops when focus is achieved,
resulting in AF lock.
(2)
Al Servo AF: Tracks subject movement up to the start of
exposure. No in-focus indicator (blinks at 8 Hz only if AF fails).
(3) Manual focusing: Enabled with the focusing ring when the lens
focus mode is set to MF (or M). Electronic manual focusing
during continuous shooting and exposure is enabled with PB-
■ E2 and NP-E2.
In-focus indicator.........Flashing focusing point in viewfinder (can be disabled with a
Custom Function), in-focus indicator, and beeper (can be
disabled with the Main Switch).
Focusing point selection.(1) Automatic selection: Focusing point camera-selected.
(2) Manual selection: Focusing point manually-selected.
Focusing point registration and switching
.Any single focusing point or 45-point automatic selection can be
registered by pressing the Assist button and FE lock button
simultaneously.
Pressing the Assist button and focusing point selector switches to
the registered focusing point.
135