Remove the battery magazine, Install the batteries – Canon EOS 1 V HS User Manual
Page 118
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
For EOS-1 VHS Users
Attachment screw
Positioning pin
Film advance coupler
Gear train switching pin
Battery magazine latch
Contacts
Vertical-grip
Main Dial
<FEL> Vertical-grip FE lock/
multi-spot button
Attachment knob
<^> Vertical-grip AE lock
button
<0ir)> Vertical-grip focusing point
selector
Battery magazine
Vertical-grip shutter button
ON/OFF switch
Tripod socket
Hand Strap eyelet
.
Remove the battery magazine.
• Turn the battery magazine latch as
shown by the arrow. Then pull out the
magazine.
• To reinstall the battery magazine,
follow this procedure in reverse.
Install the batteries.
• Refer to the battery orientation
diagram on the magazine and install
the batteries in the proper
+
and -
orientation. If any battery is not
oriented properly, the Power Drive
Booster will not operate.
• The battery level can be checked
with the camera, (^p.24)
116