Mounting and detaching a lens, Remove the caps, Attach the lens – Canon EOS 1 V HS User Manual
Page 21: On the lens, set the focus mode, Switch to af, Remove the front lens cap
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Mounting and Detaching a Lens
Mounting a Lens
Red dots
Remove the caps.
• Remove the rear lens cap and the
body cap by turning them as shown
by the arrow.
Attach the lens.
• Align the red dots on the lens and
camera and turn the lens as shown
by the arrow until it snaps in place.
On the lens, set the focus mode
switch to AF.
• If the focus mode switch is set to
MF
(or
M
on older lenses), autofocus will
not operate.
Remove the front lens cap.
Detaching the Lens
While pressing the lens release
button, turn the lens as shown by
the arrow.
• Turn the lens until it stops, then
remove the lens.
âJ • Be careful not to lose the lens caps and body cap.
• AF stands for autofocus.
• MF or M stands for manual focus.
21