Catler ES 8010 - Manual (Page 10)

10
ASSEMBLING YOUR ESPRESSO MACHINE ES 8010
ASSEMBLING YOUR ESPRESSO MACHINE ES 8010
Your Espresso Machine will have the Drip Tray,
Storage Tray and Water Tank in place when you
unpack it from the box.
The Storage Tray is located at the base of the
machine against the back wall. The Drip Tray
is located in the base of the machine in front
of the Storage Tray. The Water Tank is located
over the Drip Tray, in the front opening of the
machine.
The 2 stainless steel Filters, Cleaning Tool,
Measuring/tamping Spoon, Filter Holder and
Frothing Jug will all be packed inside the
foam packaging. Ensure you have located all
parts and accessories before throwing out the
packaging.
The Storage Tray is a convenient location to
store the Cleaning Tool, stainless steel fi lters
and Measuring/tamping Spoon when not in
use, so they are not misplaced.
Remove the Drip Tray, Water Tank and Storage
Tray and wash all parts and accessories in
warm, soapy water using a non-abrasive
washing liquid. Rinse and dry thoroughly.
NOTE:
Do not clean any of the parts or
accessories in the dishwasher
TO REASSEMBLE: STEP 1
Insert the Storage Tray into the base of the
machine and slide in towards the back wall. This
is a convenient location to store the Cleaning
Tool, stainless steel Filters and Measuring/
tamping Spoon when not in use, so they are
not misplaced.