Catler ES 8010 - Manual (Page 27)

DECALCIFYING
•
After regular use, hard water can cause
mineral build up in and on many of the
inner functioning components, reducing
the brewing fl ow, power of the machine,
and aff ecting the quality of coff ee.
• We advise decalcifying the machine on
a regular basis (every 2-3 months) using
a mixture of white vinegar and water.
Follow the instructions provided, or use the
following as a guide:
Diluted solution (for softer water)
•
1 part white vinegar
• 2 parts cold tap water
Concentrated solution (for harder water)
•
1 part white vinegar
• 1 part cold tap water
DECALCIFYING THE MACHINE
•
Ensure the Selector Control is in the
‘Standby’ position, the Power On/Off
button is set to the ‘Off ’ position and the
machine is switched off at the power outlet
and unplugged.
• Remove the Filter Holder and Frothing
Attachment. Pour the mixture of white
vinegar and water into the water tank.
• Plug the machine into the power outlet
and switch on.
• Set Power On/Off button to the ‘On’
position and the Selector Control to the
‘Standby’ position
• Place a large container under both the
Brew Head and the Steam Wand.
• When the brewing temperature is reached
the ‘Heating’ light will switch off . Set the
Selector Control to the ‘Espresso’
position and let half the mixture of white
vinegar and water run through the Brew
Head.
• Set the Selector Control to the ‘Steam’
position and allow the remaining liquid
to run through the Steam Wand. When
the liquid stops fl owing, set the Selector
Control back to the ‘Standby’ position.
• After decalcifying, remove the Water Tank
and rinse thoroughly then re-fi ll with fresh
cold water. To rinse the machine, run half
the water through the Brew Head and half
through the Steam Wand.
• The machine is ready for use.
27 27
CARE AND CLEANING
WARNING:
DO NOT IMMERSE CORD, PLUG OR APPLIANCE IN WATER OR ANY OTHER LIQUID.
THE WATER TANK SHOULD NEVER BE REMOVED OR COMPLETELY EMPTIED DURING
DECALCIFYING.