ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 113)

Probe
Description Probe Response
Command
Rx Set range.
• x=1, 2, 3, 4, or N (next
range)
Rx, where x is the range
• x=returns the range
currently in use
• x=1, 2, 3, 4 enables the
selected range
x=N sets the probe to the next
higher range
Tx Read temperature.
• x=C or F
For TF command:
Txxx
• xxx=temperature in degrees
in Fahrenheit
For TC command:
Txxx
• xxx=temperature in degrees
in Centigrade
Ux Set unit type.
• x=1, 2, 3, or N (next
unit)
• 1=V/m
• 2=mW/cm²
• 3=[V/m]²
Z Zero
Null Send the ASCII null
character.
This is a special command that
can be used as the initial
command to the probe after it is
turned on. The probe responds
with N.
Operating Protocols | 113
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.