ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 154)

Status Codes
A description of the status code can be returned by calling the function
ETS_GetErrorDescription. See Advanced Function Reference on page 130 for
the description of the function call.
Codes Description
0 OK
1 Probe handle does not exist
2 Probe family does exist
3 Unable to open communication port
4 Probe not connected
5 Probe response incorrect
6 Operation timeout
7 Busy
8 Probe object does not exist
9 Probe did not respond
10 Probe out of range
11 Invalid input parameter
12 Probes internal gain setting incorrect (cycle power)
13 Error in closing the COMM port
14 Unable to purge COMM port
15 COMM port error
16 Error in writing to COMM port
17 Error in reading from COMM port
18 Laser current too high
154 | ETSProbe DLL User Guide
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.