ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 151)

ETS_S UPPLY V OLTAGE ()
int ETS_SupplyVoltage(int Handle, float &voltage);
Purpose: Monitors the converter voltage of the laser. In addition
the battery voltage of the probe is accessible through
this function. ETS_ReadBattery function must be
called to refresh this value.
Return Value: Returns an integer status code. The numeric value 0
indicates successful completion.
See Status Codes on page 127 for error code
description.
Input Parameters: int probeHandle
Output Parameters: The converter voltage or battery voltage.
ETSProbe DLL User Guide | 151
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.