ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 27)

Fiber Optic Cable Connector: Two fiber optic connectors mounted on
the housing:
• FC for laser
• ST for transmitter
Probe Mount: 1/4–20 UNC tapped hole (internal thread)
Dimensions:
Housing: 32 mm x 32 mm x 32 mm
1.26 in x 1.26 in x 1.26 in
Probe Shields: 43 mm (1.69 in)
Weight: 80 g (2.82 oz)
HI-6122 O PERATION
The HI-6122 can be used with the HI-6100 Field Monitor. It can also be
connected to a personal computer using an optional HI-6113 Laser Data
Interface (LDI) and ProbeView™ Laser software.
The HI-6122 is a true 3-axis probe. When requested, X, Y, Z, and total field data
can be reported.
For a list and description of communication and information transfer protocols,
including command structure, probe commands, and HI-6113 commands, see
Appendix E: Operating Protocols on page 105.
Laser-Powered Field Probes: HI-6122 Electric Field Probe | 27
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.