ETS-Lindgren HI-4422 Field Probe (Archived) User Manual
Page 80
Advertising
80 |
Probe Shield Care and Replacement
Over-tightening the screws may damage the screw heads. If you
require additional nylon screws, you may order them from
ETS-Lindgren or obtain them locally. Non-conductive screws must be
used for this application. Never use metal screws.
5.
Repeat this procedure for the other shields, if necessary.
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.
Advertising