ETS-Lindgren HI-4422 Field Probe (Archived) - Manual (Page 56)

Recycle the used batteries, or dispose of them safely and properly.
Many cities collect used batteries for recycling or disposal. You may
contact your local waste disposal agency for information on battery
recycling and disposal.
8. Reattach the two boards at the connector.
9. Slide the two boards into the correct tracks inside the housing, and
carefully push them until they are completely recessed.
10. Replace the bottom of the housing, avoiding damage to the power
button wires.
11. Replace and tighten the four screws into the bottom of the housing.
HI-6053 A DDITIONAL P ARTS
Use the following table to order replacement or optional parts for the HI-6053.
Optional Part Description Part Number
Cable, Fiber Optic, Glass
H-491106-xx
(xx=length in meters)
Connector Set, two required
(Bulkhead Feedthru)
H-231205000
Fiber Optic / RS232 Interface HI-4413P
Fiber Optic to USB Converter, USB
Interface
HI-4413USB
Battery Charger H-491198-01
Carrying Case H-491291
Tripod, Dielectric H-491009
HI-6100 Field Monitor HI-6100
56 | Battery-Operated Field Probes: HI-6053 Field Probe
Archived 6/29/10
Use only the content for
HI-4422 in this manual.
Disregard content for
all other probe models;
see ETS-Lindgren
website for other
probe content.