Kontron AT8050 - Manual (Page 120)

Software Setup
104 AT8050
www.kontron.com
5.1.7 System Management Menu
5.1.7.1 Remote Access Configuration sub-menu
Feature Option Description Help text
Remote Access
Configuration
N/A Selects sub-menu. N/A
Set LAN Configuration N/A Selects sub-menu.
IPMI over LAN (and
Serial Over LAN).
Watchdog Timers N/A Selects sub-menu. N/A
System Information N/A Selects sub-menu. N/A
Managed FRU Deactivation
Policies
N/A Selects sub-menu. N/A
OEM e-keying
Configuration
N/A Selects sub-menu. N/A
Feature Option Description Help text
Serial Port Number
COM1
COM2
Configures serial port for console redirection.
Also used for Headless operation mode
through ACPI.
Select serial port for
console redirection.
Serial Port 1 I/O address 3F8/IRQ4
Displays the hardware address of the COM 1
port.
N/A, display only.
Serial Port 2 I/O address 2F8/IRQ3
Displays the hardware address of the COM 2
port i.e. RTM serial port.
N/A, display only.
Baud Rate
115200 8,n,1
57600 8,n,1
38400 8,n,1
19200 8,n,1
9600 8,n,1
Configures serial port Baud rate for both serial
ports.
Select serial port Baud
rate.
Flow Control
Hardware
Software
None
Configures flow control for console redirection
for both serial ports.
Select flow control for
console redirection.
Terminal Type
ANSI
VT100
VTUTF8
Configures the type of console emulation used
for both serial ports.
Select the typeof
console emulation used.
Terminal Size 80x24 Displays terminal size. N/A, display only.