4 compliance, 5 hot-plug capability, 6 interfacing with the environment – Kontron AT8050 User Manual
Page 21: 1 rtm (rear transition module), 1 standard compliance, Rtm (rear transition module)
Product Description
5
www.kontron.com
1.4
Compliance
This product conforms to the following specifications:
• PICMG3.0 R3.0(Advanced TCA Base Specification)
• PICMG3.1 R1.0 (Ethernet/Fiber Channel over AdvancedTCA)
• AMC.0 R2.0 (Advanced Mezzaninne Card Base Specification)
• AMC.1 R1.0 (Advanced Mezzaninne Card PCI-Express)
• AMC.2 R1.0 (Advanced Mezzaninne Card Ethernet)
• AMC.3 R1.0 (Advanced Mezzaninne CardStorage)
• ACPI rev 2.0
• HPM.1
• IPMI 2.0
1.5
Hot-Plug Capability
The AT8050 supports Full Hot Swap capability as per PICMG3.0R3.0 for the board itself and AMC bay. It can be
removed from or installed in the system while it is on (without powering-down the system). Please refer to
the PICMG3.0R3.0 specification for additional details about Hot Swap.
The AT8050 supports PCI-Express Hotplug on AMC B1. The IPMC uses the standard PCI Express Hotplug
Controller on the CPU board allowing hot insertion and removal of an AMC.1 module within the OS.
The AT8050 supports also the RTM Hotplug and the RTMDISK Hotplug.
1.6
Interfacing with the Environment
1.6.1
RTM (rear transition module)
The RTM8050 is a single slot (6HP) AdvancedTCA Rear Transition Module. This module provides additional
connectivity for AT8050 CPU front blade.
1.6.1.1
Standard Compliance
• PICMG3.0 R3.0 - Advanced Telecommunication Computing Architecture
• SFF-8470 (T10 Technical Committee and SCSI Trade Association)