Kontron AT8050 - Manual (Page 127)

Software Setup
111 AT8050
www.kontron.com
5.1.7.12 OEM e-keying Configuration sub-menu
Feature Option Description Help text
PCI Express SSC Setting
Enabled
Disabled PCI Express Spread Spectrum Clock Mode
support can be SSC/Non-SSC.
Select the PCI Express
Spread Spectrum Clock
"SSC" Mode. Warning!
Re-insert the blade after
changing the PCI Express
Clock Mode. This is used
for AMC.1 module e-
keying.
PCI Express SSC State
Enabled
Disabled Display actual AMC PCI Express Spread
Spectrum Clock Mode.
N/A
Upd. Channel Override
Setting
Disabled
Auto
Enabled
Route Update Channel PCI Express.
Disabled: disable PCIe
port and PCIe clock.
Enabled: enable PCIe
port and PCIe clock
Auto: enable PCIe based
on e-keying. Warning!
Reinsert the blade after
changing settings.
Upd. Channel Override
State
Disabled
Auto
Enabled
Display actual Update Channel PCI Express
Routting.
N/A
Management LAN Setting
Disabled
Front Panel
AMC.2 Module
RTM
Fabric Interface
Route Management LAN to the selected
destination.
Selects where the
Management LAN ports
are routed. Warning!
Reinsert the blade after
changing settings.
Management LAN State
Disabled
Front Panel
AMC.2 Module
RTM
Fabric Interface
Display actual Management LAN Routing. N/A
AMC P8-11 Setting
Disabled
Fabric Interface
Route AMC port 8-11 to Fabric or disable.
Disabled: AMC.2 module
is not connected to
Fabric Interface. FI:
allow AMC.2 module
connection to FI. When
this option is enabled,
the i82599EB cannot be
used on the FI.Warning!
Re-insert the blade after
changing settings.
AMC P8-11 State
Disabled
Fabric Interface
Display actual AMC Port 8-11 Routing. N/A
RTM Serial Port Setting
CPU COM2
AMC P15
Route AMC port 15 to RTM or disable.
Select which Serial Port
is routed to the RTM
Serial Port connecter. An
e-keying match is
required between the
AMC and the RTM for the
serial link to work.
Warning! Re-insert the
blade after chaning
settings.