Kontron AT8050 - Manual (Page 122)

Software Setup
106 AT8050
www.kontron.com
5.1.7.4 MAC Address Configuration sub-menu
5.1.7.5 Subnet Mask Configuration sub-menu
Feature Option Description Help text
LAN Parameter Selector 05
The parameter selector assignments are
described in IPMI Specification 2.0, table 23-
4. Selector #05: MAC Address.
N/A, display only.
Channel Number 01 or 02
Each interface has a channel number that is
used when configuring the channel and for
routing messages between channels. Channels
01 and 02 on Base interface are available. The
channel number assignments are described in
IPMI Specification 2.0, table 6-1.
Enter Channel Number
for SET LAN Config
Command. Proper value
01 or 02.
Channel Status Valid or Invalid Display Valid if IPMC support LAN Channel. N/A, display only.
Current MAC Address xx.xx.xx.xx.xx.x x
Display the current MAC Address stored in IPMI
NVRAM for IPMI LAN.
N/A, display only.
Feature Option Description Help text
LAN Parameter Selector 06
The parameter selector assignments are
described in IPMI Specification 2.0, table 23-
4. Selector #06: Subnet Mask.
N/A, display only.
Channel Number 01 or 02
Each interface has a channel number that is
used when configuring the channel and for
routing messages between channels. Channels
01 and 02 on Base interface are available. The
channel number assignments are described in
IPMI Specification 2.0, table 6-1.
Enter Channel Number
for SET LAN Config
Command. Proper value
01 or 02.
Channel Status Valid or Invalid Display Valid if IPMC support LAN Channel. N/A, display only.
IP Address Source Static or DHCP
Select whether IP Address is set static or
retreive using DHCP.
Select IP Address
Source: Static or DHCP
Current Subnet Mask xxx.xxx.xxx.xxx
Display the current Subnet Mask configuration
stored in IPMI NVRAM for IPMI LAN.
N/A, display only.
Subnet Mask xxx.xxx.xxx.xxx
This allows setting of a Subnet Mask for LAN
configuration when IP Address Source is set to
static. This option is hiden when DHCP source
is selected.
Enter Subnet Mask in
decimal in the form of
XXX.XXX.XXX.XXX (XXX
less than 256 and in
decimal only).