Mercedes-Benz CL-Class 2007 - Manual (Page 271)

270
Control systems
Instrument cluster control system
Calling up vehicle malfunction, warning
and system status messages stored in
memory
Use the vehicle status message memory
menu to scan malfunction and warning
messages that may be stored in the sys-
tem. Such messages appear in the multi-
function display and are based on
conditions or system status the vehicle’s
system has recorded.
The vehicle status message memory menu
only appears if there are any messages
stored.
̈ Press ( or & to select the
“Service” menu.
If conditions have occurred causing
status messages to be recorded, the
number of messages appears in the
multifunction display: “2 Messages”.
̈ Press % or $ to select the mes-
sage.
̈ Press # to confirm.
Checking tire inflation pressure
For information about checking tire infla-
tion pressure (
୴ page 531).
Calling up the maintenance service in-
dicator display
For information about calling up the main-
tenance service indicator display
(
୴ page 551).
Checking engine oil level (CL 600)
For information about checking engine oil
level (
୴ page 514).
Warning!
G
Malfunction and warning messages are only
indicated for certain systems and are inten-
tionally not very detailed. The malfunction
and warning messages are simply a remind-
er with respect to the operation of certain
systems and do not replace the owner’s
and/or driver’s responsibility to maintain
the vehicle’s operating safety by having all
required maintenance and safety checks
performed on the vehicle and by bringing
the vehicle to an authorized Mercedes-Benz
Center to address the malfunction and
warning messages ( ୴ page 580).
i
See the “Practical hints” section for mal-
function and warning messages ( ୴ page 580).
i If you turn the SmartKey in the starter
switch to position 0 and then back to position 2,
all messages will be deleted from the message
memory.