Mercedes-Benz CL-Class 2007 - Manual (Page 562)

559
Operation
Vehicle care
Cleaning the Parktronic* system
sensors
1 Parktronic system* sensors in front
bumper
̈ Use a mild car wash detergent, such as
Mercedes-Benz approved Car Sham-
poo, with plenty of water and a soft,
non-scratching cloth to clean
sensors
1 on the bumpers.
Cleaning the Park Assist* system
sensors
The sensors are integrated in the front and
rear bumpers and cannot be seen from the
outside.
1 Bumper area near sensors
̈ Switch off the ignition ( ୴ page 336).
! Do not apply strong pressure to the sensor
covers. Applying strong pressure may damage
the sensor covers.
Follow the instructions provided by the power
washer manufacturer on maintaining a distance
between the vehicle and the nozzle of the power
washer.
!
To prevent scratches, never apply strong
force and only use a soft, non-scratching cloth
when cleaning the sensors. Do not attempt to
wipe dirty sensors with a dry cloth or sponge.
୴୴