Mercedes-Benz CL-Class 2007 User Manual
Page 648
645
Practical hints
Replacing bulbs
1 Installation device
2 Bulb
̈
Pull bulb
2 out of the socket.
̈
Insert new bulb
2 into the socket.
̈
Insert installation device
1 into the
headlamp so that the handle of the in-
stallation device points up (left head-
lamp) or down (right headlamp).
̈
Pull installation device
1 down (left
headlamp) or up (right headlamp) until
it engages.
̈
Attach cover (
page 644) and let it au-
dibly engage to close.
Corner-illuminating lamp
1 Bulb holder
2 Wire position
̈
Turn bulb holder
1 counterclockwise
until it disengages.
̈
Take out bulb holder
1.
̈
Take bulb out of holder.
̈
Insert new bulb into holder and press it
all the way down.
̈
Insert bulb holder
1 into guide in
headlamp.
The tab of the bulb holder must be po-
sitioned on the upper left-hand side
and wire
2 must point downward and
to the left for the left headlamp, up-
ward and to the right for the right head-
lamp.
̈
Turn bulb holder
1 clockwise until it
engages.
i
Make sure to insert the bulb in the right di-
rection. The bulb must fit plane on the socket.