Mercedes-Benz CL-Class 2007 - Manual (Page 655)

652
Practical hints
Flat tire
Removing the wheel
1 Alignment bolt
̈ Unscrew upper-most wheel bolt and re-
move.
̈ Replace this wheel bolt with alignment
bolt
1 supplied in the tool kit.
̈ Remove the remaining bolts.
̈ Remove the wheel.
Mounting the Minispare wheel
1 Wheel bolt for light alloy rims
2 Wheel bolt for Minispare wheel
(located in trunk with spare wheel)
Warning!
G
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
ț Never start the engine when the vehicle
is raised.
ț Never lie down under the raised vehicle.
! Do not place wheel bolts in sand or dirt. This
could result in damage to the bolt and wheel hub
threads.
!
Wheel bolts 2 must be used when mount-
ing a Minispare wheel. The use of any wheel
bolts other than wheel bolts
2 for a Minispare
wheel will physically damage the vehicle’s
brakes.
Warning!
G
Make sure to use the original length wheel
bolts when remounting the original wheel
after it has been repaired.
୴୴