Mercedes-Benz CL-Class 2007 User Manual
Page 657
654
Practical hints
Flat tire
Lowering the vehicle
̈
Lower vehicle by turning crank coun-
terclockwise until vehicle is resting ful-
ly on its own weight.
̈
Remove the jack.
1 - 5 Wheel bolts
̈
Tighten the five wheel bolts evenly,
following the diagonal sequence
illustrated (
1 to 5), until all bolts are
tight. Observe a tightening torque of
110 lb-ft (150 Nm).
Before storing the jack, it should be fully
collapsed, with handle folded in (storage
position).
̈
Store the jack and the other vehicle
tools in the designated storage space
underneath the trunk floor
(
Warning!
G
Have the tightening torque checked after
changing a wheel. The wheels could come
loose if they are not tightened to a torque of
110 lb-ft (150 Nm).
i
Do not activate the tire inflation pressure
monitor (
page 531) until a full size wheel/tire
with functioning sensor has been placed back
into service on the vehicle.