Mercedes-Benz CL-Class 2007 - Manual (Page 636)

633
Practical hints
Where will I find ...?
Vehicle jack
Storage position
̈ Remove vehicle jack from its
compartment.
̈ Turn crank handle in direction of arrow
as far as it will go.
Operational position
̈ Turn crank handle clockwise.
Before storing the vehicle jack in its
compartment:
ț It should be fully collapsed.
ț The handle must be folded in (storage
position).
Warning!
G
The jack is designed exclusively for jacking
up the vehicle at the jack take-up brackets
built into both sides of the vehicle. To help
avoid personal injury, use the jack only to lift
the vehicle during a wheel change. Never
get beneath the vehicle while it is supported
by the jack. Keep hands and feet away from
the area under the lifted vehicle. Always
firmly engage the electronic parking brake
and block wheels before raising vehicle with
jack.
Do not disengage electronic parking brake
while the vehicle is raised. Be certain that
the jack is always vertical (plumb line) when
in use, especially on hills. Always try to use
the jack on level surface. Make sure the jack
arm is fully seated in the jack take-up brack-
et. Always lower the vehicle onto sufficient
capacity jackstands before working under
the vehicle.