Mercedes-Benz CL-Class 2007 User Manual
Page 656
653
Practical hints
Flat tire
̈
Clean contact surfaces of wheel and
wheel hub.
̈
Guide the Minispare wheel onto the
alignment bolt and push it on.
̈
Insert wheel bolts and tighten them
slightly.
̈
Unscrew the alignment bolt, install the
last wheel bolt and tighten slightly.
!
To avoid paint damage, place wheel flat
against hub and hold it there while installing first
wheel bolt.
Warning!
G
Always replace wheel bolts that are dam-
aged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Center or call
Roadside Assistance.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident.
Make sure you are using the correct wheel
bolts.
Warning!
G
Only use genuine Mercedes-Benz wheel
bolts. Other wheel bolts may come loose.
Do not tighten the wheel bolts when the ve-
hicle is raised. Otherwise the vehicle could
fall off the jack.