Mercedes-Benz CL-Class 2007 - Manual (Page 619)

616
Practical hints
What to do if …?
Display Possible cause/consequence Possible solution
Key
not recognized The SmartKey with KEYLESS-GO* is
momentarily not recognized. ̈ Change the position of the SmartKey with
KEYLESS-GO* in the vehicle.
̈ If necessary, operate vehicle using SmartKey
with KEYLESS-GO* in starter switch under
KEYLESS-GO* button (
୴ page 337).
Key being
initialized…
Please wait The SmartKey with KEYLESS-GO* is being
initialized in the vehicle. ̈ Wait until the message disappears from the
multifunction display.
Remove starting
button, then
insert key The KEYLESS-GO* system is
malfunctioning. ̈ Remove KEYLESS-GO* button from the
starter switch (
୴ page 337).
̈ Operate the vehicle with the SmartKey with
KEYLESS-GO* in the starter switch.
Replace key The SmartKey with KEYLESS-GO* must be
replaced. ̈ Contact an authorized Mercedes-Benz
Center as soon as possible.