Mercedes-Benz CL-Class 2007 User Manual

Page 537

Advertising
background image

534

Operation

Tires and wheels

Reactivating Advanced TPMS

The Advanced TPMS must be reactivated
when you have adjusted the tire inflation
pressure to a new level (e.g. because of dif-
ferent load or driving conditions). The Ad-
vanced TPMS is then recalibrated to the
current tire inflation pressures.

̈

Using the Tire and Loading Information
placard on the driver’s door B-pillar
(

page 523) or, if available, the sup-

plemental tire inflation pressure
information on the inside of the fuel fill-
er flap (

page 509), make sure the tire

inflation pressure of all four tires is
correct.

̈

Switch on the ignition (

page 336).

̈

Press

( or & to select the menu

Service”.

̈

Press

$ or % to select

Tire pressure”.

̈

Press

#.

You will see

ț

the current inflation pressures for
each tire

or

ț

the message

“Tire pressures
displayed after driving
a few minutes”

appear in the multifunction display.

̈

Press

%.

The message

“Use current pressure
values as new
reference values
To confirm press "OK"”

appears in the multifunction display.

Warning!

G

It is the driver’s responsibility to calibrate

the Advanced TPMS on the recommended

cold inflation pressure. Underinflated tires

affect the ability to steer or brake the vehi-

cle. You might lose control over the vehicle.

i

Reactivate the Advanced TPMS after adjust-

ing the tire inflation pressure to the inflation
pressure recommended for the vehicle operating
condition. Tire inflation pressure should only be
adjusted on cold tires. Observe the recommend-
ed tire inflation pressure on the Tire and Loading
Information placard on the driver’s door B-pillar
(

page 523). Some vehicles may have supple-

mental tire inflation pressure information for
driving at high speeds (

page 529) or for vehi-

cle loads less than the maximum loaded vehicle
condition. If such information is provided, it can
be found on the inside of the fuel filler flap
(

page 509).

i

After wheel rotation or sensor replacement,

the vehicle must be parked for 20 minutes be-
fore attempting to reactivate the Advanced
TPMS.

i

The menu overview can be found on

(

page 258).

Advertising